OUR PRODUCTS

Fuel Right (6 oz.) (Basic Formula)

This is the chemistry that put us on the map in 1996. Previously called Fuel Right EP, the formula has been made more concentrated without sacrificing any of the active ingredients or performance, so it now comes in smaller containers. Also available for order of three bottles as a retail trial pack.

Dosage Recommendations:
One 6-ounce bottle per 275 or 300 gallon tank-add once or twice a year. This is a shock treatment of the whole system and does not need to be done with every fill. For bulk treating fuel (low level treatment) this bottle treats 700 gallons. At this dose rate you should treat all of the fuel all the time. Bulk treating ULSD fuel reduces metal wear and extends the life of injector pumps and injectors.

Above treat rates are designed to give the most cost-effective solutions to fuel problems, adding more or treating more often rarely has a down side other than cost. More Fuel Right will accelerate dissipation of old, existing sludge in the system-but may, under certain circumstances, loosen the old sludge and lead to sludge carryover into filters. See Treating Agitated Systems for more information.

Fuel Right (24 oz.)

Offering the same time-tested formula as the 6-oz bottle, this larger size provides greater economy and convenience for treating larger tanks or larger quantities of fuel. Its primary use is for bulk-treating fuel delivery trucks. Also available for order of two bottles as a retail trial pack.

Dosage Recommendations:
One bottle is a shock treatment for a 1000 gallon tank once or twice a year. For bulk treating, one bottle treats approximately 2800 gallons of fuel (a typical delivery truck). Fuel Right basic formula will rapidly mix without agitation, and can therefore be poured into the tank or truck before, during or after filling.

Fuel Right 15K (half gal.)

Made up of the same formula as the smaller bottles, the name reflects its 1:15,000 treat ratio for bulk treating larger quantities of heating oil or diesel fuel. The primary use for this bottle is for bulk treating transport loads of fuel.

Dosage Recommendations:
One bottle is a shock treatment for approximately 3000 gallons of fuel. (See Treating Larger Tanks for additional information.) For bulk treating, one bottle treats 7500 gallons. This may be added before, during or after loading.

Summer Diesel (8 oz.)

This diesel formula is the same basic chemistry as above Fuel Right products but diluted for convenience in treating smaller tanks. In addition to controlling sludge, fouling, corrosion, and freeze-ups in diesel equipment, it also reduces metal wear in ULSD service and extends the life of injector and injector pumps. Also available for order of a half-case of 12 bottles as a retail trial pack.

Dosage Recommendations:
One bottle is a shock treatment for 100 gallons of fuel. Treat every fill to get maximum wear protection, or every 3-4 fills if control of sludge, fouling and corrosion is the only concern and reduced metal wear is not a requirement.